Hubs
$94.99 - $199.99
Product specs:
- Front hub features
- 7075 t6 alloy axle
- Qr or 15mm axle type
- Japanese cartridge bearings
- 28,32 hole count
- 205g
- Rear hub features
- 7075 t6 alloy axle
- Qr or 12x142mm axle type
- Four sealed cartridge bearings
- 28,32 hole count
- 325g
$89.90
- Kick-shift 2-speed hub
- Coaster brake
- Benefits include its simple backpedal-action shifting/braking and no cables or shifters
- 6061 aluminum hub shell with 13/32" slotted solid axle (162mm overall axle length)
- Gear ratio range of 138%
- Includes 22 tooth 3-spline cog
- 116mm OLD (over-locknut dimension)
$114.86
- Internal gear 3-speed hub with HG-splined 8-10sp freehub body for use with any IS 6-bolt disc brake
- 6061 aluminum hub shell with 13/32" slotted solid axle (179mm overall axle length)
- Gear ratio range of 177% (33% each step)
- Cassette and shifters sold separately. Special shifter setup required: internal 3sp is shifted via a standard mountain 3sp front derailleur shifter. Sturmey Archer shifters not compatible with this hub
$79.90
- Threaded for multi-speed freewheel (7sp), includes 70mm drum brake
- A356 aluminum hub shell with 9mm solid axle (183mm overall axle length)
- Freewheel and brake lever sold separately
$77.90 - $82.76
- A356 aluminum hub shell with 9mm solid nutted axle (136mm overall axle length)
- Choose 70mm or 90mm drum brake front hub (brake lever sold separately)
$109.78
- Dynamo generator front hub features 3.0-watt headlight power supply
- A356 aluminum hub shell with 9mm solid nutted axle (140mm overall axle length)
- Choose 70mm or 90mm drum brake (brake levers sold separately)
- Light sold separately
$81.90
- Threaded for singlespeed freewheel, includes 70mm drum brake
- A356 aluminum hub shell with 9mm solid axle (183mm overall axle length)
- Freewheel and brake lever sold separately
$46.16
- Use a front/reat set or match the front with Sturmey 3sp fixed rear or 2sp kickback rear
- 6061 aluminum shell with sealed cartridge bearing and solid nutted axle (145mm front/175mm rear overall axle length)
- Rear is flip-flop threaded for freewheel
$249.99
- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup
- 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click
- Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel
- Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes
- Advanced seal system improves prevention of bearing/drive system contamination
$89.99
- eMTB rated with steel axles
- 6902 cartridge bearings and robust 10 degree engagement
- 32h spoke count
- For J-Bend spokes only
$214.99
- Tough on trail and light on price rated for everything from XC to Enduro and E-bike
- Steel axles cartridge bearings robust alloy hub shell and steel cassette body
- 10-degree pawl engagement
- International Standard 6-bolt disc mount
- *Shimano/SRAM
$174.99
- An oversized hub shell increases torsional and lateral stiffness
- 6902 bearings for maximum durability
- Wide bearing placement was designed to decrease load on the bearings
- Low-drag labyrinth seals
- Tool-free endcaps
- Torque-cap compatible
- Includes standard 15mm end-caps only, Torque must be purchased separately
$379.99
At the Center of It All
Cast your eyes upon your new favorite component, the infinitely adaptable, fully tuned-and-dialed hub of choice for your custom wheel build. The Vault has almost instant power transfer for slippery-fast speed by way of solid, smart design.
Power To The Pedal
Let's add it up: a 60-tooth drive ring, 6 pawls, acting in 2 groups of 3, for 120 points of engagement. The result– almost instant transfer of power.
Overbuilt But Not Overkill
With this hub, bigger is better. An oversized hub shell ads stiffness and stability while large and in-charge 6902 bearings perform for the long run.
$29.21
Hope Front Axle Conversion Kits
· Compatible with Pro 2 and Pro 2 Evo hubs
· Converts all Hope Pro 2 and Pro 2 Evo hubs to 15mm through axle hubs
$32.29
Hope Front Axle Conversion Kits
· Compatible with Pro 2 and Pro 2 Evo hubs
· Converts all Hope Pro 2 and Pro 2 Evo front hubs to 20mm through axle hubs
$25.00
12x142mm conversion endcaps for Hope Pro 2 Evo rear hubs.
$19.95
- Front axle conversion, 15mm thru-axle, Wide Boy
- Conversions for fitting a Wide Boy hub onto either a 15mm or 20mm thru-axle fork
$35.95
- 10 x 135mm adapters for 6-Drive rear road disc hub
- Includes: two adapters and one disc rotor spacer
- Conversion kits for Spin Doctor 6-Drive hubs are not compatible with original Spin Doctor and Spin Doctor Pro hubs
$199.95
- Axle/Spacing: 10/14 x 135mm bolt-on
- 14mm adapters included
- Micro-drive cassette rear hub for singlespeed and dirt jump
- International Standard 6-bolt disc rotor mount
- Bushed driver for greater durability over cartridge bearings (bearings have to be smaller for micro-drive, thus prone to higher loads)
- Forged 6061 aluminum shell, 2 main body sealed cartridge bearings
- CrMo M10 bolt-in fittings with 6mm anti-rotation hex fitting (helps when tightening wheel in frame)
- 12mm thru-axle conversion for DJD-BD available separately
- No cog included
- 9/10/11/13/16t mini sprockets available separately
$299.95
- Axle/Spacing: 10/14 x 135mm nutted
- International Standard 6-bolt disc rotor mount
- 11 tooth (1/8") steel cog is pre-installed, ideal for compact drivetrain setup
- Tough, instant pickup 120 point triple wedge pawl system with a bushed mini threaded driver for Singlespeed and Dirt Jump
- Bushed driver is more durable than cartridge bearings
- Forged 6061 aluminum shell, 2 main body sealed cartridge bearings
- CrMo M10 bolt-in fittings with 6mm anti-rotation hex fitting (helps when tightening wheel in frame), 14mm adapters included
$7.95
- CNC alloy thread cover for fixed hubs with 1.37 x 24tpi
- Protects bare threads, allows color coordination
- Fits both freewheel and fixed-threaded sides (just add the included small washer to fixed side)
$69.95
- Chromoly freehub body for Spin Doctor 6-Drive rear hub
- HyperGlide 8-11-speed
- Shimano/SRAM 8-10-speed, Shimano 11-speed mountain cassette compatible
- Compatible with road and mountain 6-Drive hubs
$79.95
- Axle/Spacing: 9 x 100mm nutted
- Hole: 32-hole
- Weight: 252g
- CNC machined, high-polished, high-flange aluminum shell
- Japanese sealed cartridge bearings
- Hollow CrMo nutted axle with titanium color finish
$19.95
- Rear axle conversions for Spin Doctor Pro rear hub
- Various replacement axles and conversion kits for Spin Doctor and Spin Doctor Pro hubs
- Some conversions utilize pre-existing axle components for retrofit
- Conversion kits for original Spin Doctor and Spin Doctor Pro hubs are not compatible with Spin Doctor 6-Drive hubs
$19.95
- Rear axle replacement kit, 10mm nutted, DJD-SupaD
- Spin Doctor, Spin Doctor Pro and Spin Doctor 6-Drive parts are generally not cross compatible
- DJD and DJD-BD parts are generally not cross compatible
$84.95
- Axle/spacing: 10 x 120mm nutted
- Hole: 32-hole
- Weight: 304g
- CNC machined, high-polished, high-flange aluminum shell
- Japanese sealed cartridge bearings
- Hollow CrMo nutted axle with titanium color finish
- 120mm OL spacing rear hub with either double fixed flip-flop threading or fixed on one side and freewheel thread on the opposite
- 130mm OL rear axle conversion sold separately
$95.95
- Replacement driver for Original DJD or DJD-Bush Drive rear hub
- Need DJD Original removal tool or DJD Bush Drive removal tool (sold separately)
$99.95
- Light but strong enough for all types of riding including XC through DH
- Forged CNC machined aluminum shell 2 sealed cartridge bearings
- International Standard 6-bolt disc rotor mount
- End caps for 9x100mm QR available separately
- Boost version (HL-3208) is 15x110mm only
- Flange diameter: 58mm left/right
- Center to flange: 22mm left 30mm right
$14.95
- 15 x 100mm thru-axle endcaps for Spin Doctor 6F (front)hub
- 20 x 110mm thru-axle endcaps for Spin Doctor 6F (front hub
- Conversion kits for Spin Doctor 6-Drive hubs are not compatible with original Spin Doctor and Spin Doctor Pro hubs
$714.90
The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings.
The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.
Page 1 of 2
Next page