Chainrings

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

Shimano SLX M660 9-Speed chainrings get your drivetrain back to optimal operation.

64BCD chainring for MTB cranksets

Shimano 105 5703 10-Speed chainrings are a quality, reliable replacement option for worn out chainrings on triple cranksets.

- Drivetrain Speeds: 11 - Chainring BCD: 110 Shimano Asymmetric - Material: Aluminum

- Anodized aluminum for minimum weight

-Anodized aluminum for minimum weight

Live Long and Prosper Steel is real, so if you are pining for a 12 speed, direct mount chainring for your Cinch crankset that will stand up to years of kicking up dirt, cruising endless singletrack, smashing climbs, and everything in between, then look no further! Freedom Fighter Our Cinch interface makes this long-wearing steel direct mount chainring fast and easy to swap so you can customize your Shimano 12-speed drivetrain. Long-Hauler Stamped from real steel, this ring will keep going and going...and going. Plus, your 12-speed chain stays secure thanks to our awesome NW tooth profiling. - Compatible with Cinch Direct Mount Cranks - Steel - Direct Mount

Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings. - Compatible with 9, 10, 11, and 12-speed - Narrow Wide tooth profiling ensures consistent chain retention - Lockring installed/removed with ISIS BB tool - Stiff 4mm plate thickness to transfer loads without flexing

This direct mount chainring coincides perfectly with the Comet Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. - Long tooth profile enhances chain retention - Thick-Thin tooth design for maximum chain engagement - Laser-etched logos

These direct-mount chainrings coincide perfectly with the Comet Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. All sizes of these chainrings are steel and range from 26T to 38T. - Megatooth thick thin tooth design for Shimano 12sp mountain chain engagement - Direct mount FSA modular crank model-specific rings - Optimized new 11-speed system

Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chain - Material: Steel

The SRAM X-Sync STEEL 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-SYNC technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Drivetrain Speeds: 10 , 11 - Material: Steel - Ring Position/Type: Single - Weight: 110 grams (32t), 96 grams (30t),

The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring

Shimano 105 5800 11-Speed chainrings replace worn out parts and get your drivetrain running smoothly again. - Drivetrain Speeds: 11 - Chainring BCD: 110 asymmetric

The X-SYNC 2 Bosch Direct Mount Chainring is built with the needs of E-MTB riders in mind, and incorporates the same X-SYNC 2 Eagle chain management technology found in every SRAM 1x drivetrain. - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses - An integral component of the SRAM 1x drivetrain - Speeds: 12 - Material: Steel

The EX1 drive train was designed specifically for the demands of electric-assist mountain bikes: a wide gear range with bigger jumps between gears and sturdy components to handle higher torque loads. Liberal use of features found on SRAM’s high end MTB parts provide high value, quiet operation and ease of service. - X-Sync (wide-narrow) tooth profiles for great chain management - Compatible with Bosch mid-drive E-bike systems - Material: Steel - Size/BCD: Direct mount - Recommended Group: EX1

Shimano Ultegra R8000 Series Chainrings are designed for use with Shimano's 11-speed Ultegra crankset.

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

Shimano 105 FC-R7000 asymmetric 110 BCD chainrings for 2x11 drivetrains.

- Trushift chainrings feature shift ramps and pins - Drivetrain compatibility: 8, 9, 10, 11 - 104mm BCD

- CNC 6061 aluminum chainring with standard teeth

- 3mm thick AL7075/T6 - Optimized for use with DH chainguides - 104mm BCD

Single-speed oriented chainring for 1x DH or DJ application. - 3mm thick CNC machined 7075-T6 aluminum

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

- CNC machined 7075-T6 aluminum with modified shift gates and special profiles to allow flawless shifting with 9sp and 10sp drivetrains - Middle and outer chainrings have strategically-placed stainless steel pins to further enhance shifting - 5mm thick middle ring, 4mm thick outer ring - Anodized black with laser-etched graphics

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

The all new Turbine 11 Speed rings are ready to ride. Completely redesigned from the ground up, these rings shift like nothing else. The Turbine rings are machined from 7075 aluminum, so they are built to last. Rings are CNC'd from 7075 alloy, creating a ring with instantaneous smooth and quiet shifting, even under load. These 2x rings are super stiff at a minimal weight, resulting in a ring that demonstrates sharp and quick shifts while being highly resistant to impacts.

This direct mount chainring coincides perfectly with the Afterburner Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. - Material: Steel - Precision CNC-machined AL7075/T6 - Long tooth profile enhances chain retention - Thick Thin tooth design for maximum chain engagement - SH12: Compatible with Shimano 12s chain

The perfect option for replacing worn out chainrings on your 10-speed mountain drivetrain.